Leave Your Message

High and Low Temperature Chamber - Reliable Testing Solutions from China Suppliers and Factory

Introducing a High-Low Temperature Chamber - an advanced environmental test device designed to simulate extreme temperature conditions with precision. This essential equipment is crucial for suppliers and manufacturers in China looking to evaluate the performance, reliability, and durability of their products, components, and materials under severe thermal stress. With our state-of-the-art testing solutions, factories can ensure that their products meet the highest standards of quality before reaching the market. Trust in our High-Low Temperature Chamber to enhance your testing processes and strengthen your product offerings

    Main Features and Advantages
    • 1
      Integrated Design Combines compressor refrigeration, electric heating, circulation pump, expansion tank, and control system into a single unit, saving space and simplifying installation.
    • 2
      Wide Temperature Range Typical temperature ranges span from -80°C to +300°C (or even higher), covering the majority of experimental and industrial needs. Specific ranges depend on the model and heat transfer fluid.
      • Low-Temperature Type: e.g., -80°C to +200°C
      • High-Temperature Type: e.g., -40°C to +300°C
      • Standard Type: e.g., -25°C to +200°C
    • 3
      High-Precision Temperature Control Utilizes PID intelligent control, with temperature stability reaching ±0.1°C or even ±0.01°C, meeting the requirements of precise experiments.
    • 4
      Fully Enclosed Circulation The medium circulates in a sealed system, avoiding contact with air, which reduces oxidation, evaporation, and contamination, ensuring high safety and saving fluid.
    • 5
      High Efficiency and Speed Powerful heating and cooling capacities enable rapid achievement of target temperatures, shortening process waiting times.
    • 6
      Versatility A single unit can replace traditional setups such as "oil bath + low-temperature coolant circulation pump," enabling automated and continuous temperature ramp processes.
    Core Application Areas
    🧪 Chemistry and Pharmaceuticals
    • Temperature control for reactors and glass reaction vessels.
    • Temperature management during synthesis, crystallization, extraction, and distillation processes.
    • Pilot-scale and industrial-scale production.
    🔬 Biotechnology and Laboratories
    • Temperature regulation for fermenters and bioreactors.
    • Applications in cell culture, enzymatic reactions, and as a thermal source for PCR instruments.
    • Cooling/heating support for rotary evaporators, cold traps, and freeze dryers.
    ⚡ Materials Testing and New Energy
    • Environmental simulation for battery testing (e.g., lithium-ion batteries, fuel cells), including high-low temperature cycling tests.
    • Testing of semiconductor components and chips.
    • Research and performance testing of new materials (e.g., polymer materials).
    🚗 Automotive and Aerospace
    • Environmental simulation testing for automotive components (e.g., motors, battery packs, sensors).
    • Testing of lubricants and fuels.
    🏭 Petrochemical Industry
    • Temperature control for analytical instruments such as viscometers and rheometers.
    Selection Guide — Key Parameters to Consider When Purchasing
    🌡️ 1. Temperature Range

    Select based on the maximum and minimum temperature requirements of your experiment or process, with some allowance for margin.

    🎯 2. Temperature Control Accuracy and Stability

    Higher precision requirements typically correspond to higher equipment costs.

    ⚙️ 3. Heating and Cooling Capacity

    The power rating determines the rate of heating and cooling. This should be calculated based on the volume and material of the reactor, as well as the desired temperature ramp rate.

    💧 4. Pump Flow Rate and Head
    • Flow Rate (L/min): Determines the circulation speed and affects heat exchange efficiency.
    • Head (m): Determines the ability to overcome pipeline resistance, especially when the reactor is elevated or the piping is long.
    🛢️ 5. Heat Transfer Fluid
    • Silicone Oil: Most commonly used, wide range (-40°C to 200°C), stable performance.
    • Water/Ethylene Glycol: Suitable for above 0°C, eco-friendly and clean.
    • Special High-Temperature Oil: For use above 300°C.
    • Special Low-Temperature Fluid: For use below -80°C.
    🔄 6. Internal vs. External Circulation
    • Internal Circulation: Circulates fluid within the device, primarily for maintaining internal bath temperature.
    • External Circulation: Connects to external equipment for fluid circulation — the main function. Ensure interface compatibility during selection.
    🛡️ 7. Safety and Protection Features

    Over-temperature protection, low-liquid-level protection, over-current protection, leakage protection, and self-diagnostic functions.

    📋 8. Programming Capabilities

    Determine whether multi-segment temperature programming is needed for automated cyclic testing involving heating, holding, and cooling stages.

    Typical Industrial Applications
    16
    15
    14
    Flowchart
    High-and-Low-Temperature-Series
    Specification
    Parameter UNIT MODEL
    SOS-05 SOS-10 SOS-20 SOS-30 SOS-40
    Products Detail
    HG9A2109
    HG9A2110
    HG9A2117
    Frequently Asked Questions (FAQ)
    Q What is the typical temperature range of a dynamic temperature control system?
    Most dynamic temperature control systems (also known as TCUs) offer a temperature range from -80°C to +300°C. The exact range depends on the specific model and the type of heat transfer fluid used. Low-temperature models typically cover -80°C to +200°C, while high-temperature models can reach -40°C to +300°C.
    Q What heat transfer fluid should I choose for my application?
    The choice depends on your required temperature range: Silicone oil is the most versatile option for -40°C to 200°C. Water/ethylene glycol solutions work well for applications above 0°C. Special high-temperature oils are required above 300°C, and dedicated low-temperature fluids are needed for temperatures below -80°C.
    Q How accurate is the temperature control on these systems?
    These systems use PID intelligent control algorithms to achieve high-precision temperature regulation. Depending on the model, temperature stability can reach ±0.1°C for standard applications, and as precise as ±0.01°C for high-accuracy laboratory or industrial requirements.
    Q What is the difference between internal and external circulation modes?
    Internal circulation keeps the heat transfer fluid circulating within the device itself, maintaining the temperature of the built-in bath. External circulation connects the system to external equipment (such as reactors or test chambers) through piping, allowing temperature control of external processes. Most industrial applications rely on the external circulation function.
    Q Can the system be used for automated temperature cycling tests?
    Yes. Models with programming capabilities support multi-segment temperature programs, enabling fully automated cyclic processes that include heating, holding at target temperatures, and cooling stages. This is especially useful for battery testing, material fatigue testing, and pharmaceutical process validation.
    Q What safety features are included in these temperature control systems?
    Standard safety features include over-temperature protection, low-liquid-level protection, over-current protection, leakage protection, and self-diagnostic functions. The fully enclosed circulation design also prevents fluid oxidation, evaporation, and contamination, further enhancing operational safety.