Leave Your Message

China Oil Mold Temperature Controller - Suppliers & Factory for Accurate Heating up to 300℃

The Oil Temperature Machine is a high-performance mold temperature control unit that uses heat-conducting oil as its medium. Typically referred to as an oil heater, oil temperature heater, or oil circulation temperature controller, this equipment is designed for precision temperature regulation, achieving a maximum temperature of 300℃. As one of the leading Suppliers in China, our factory specializes in producing reliable oil temperature controllers that cater to various industries, including hot pressing dies, laminating machines, FRP, automotive interior parts, carbon fiber, composite materials, plastics, and rubber manufacturing. Enhance your productivity and ensure optimal processing conditions with our state-of-the-art oil temperature machines

    Machine Future
    • Return oil temperature display
    • Heating power gear adjustment
    • Start up automatic exhaust
    • PC board self-optimization microprocessor, PID automatic adjustment, simple operation
    • By-pass pressure relief loop for hot oil
    • The electric cabinet is isolated from the fuselage, with good thermal insulation effect and long service life of the appliances
    • Imported electrical accessories: WEST, ABB, CARLO, LS, SCHNEIDER, SIEMENS, OMRON, etc.
    • Perfect safety protection and fault display system
    • Professional personnel needed for repair and maintenance
    ⭐ Optional Features
    • Multi-point temperature control unit can be customized professionally
    • RS485 communication for automatic management
    • PLC control, high reliability, strong anti-interference ability
    • Time switch machine, cooling shut down function
    • Blow back function
    • Explosion-proof design of electric control cabinet and pipeline
    Core Working Principle and System Composition
    Its operational principle is similar to that of a water temperature control unit, as both are closed-loop heating systems. However, key differences exist due to the distinct heat transfer medium.
    1 Operating Cycle
    • High-Temperature Media Circulation: A high-temperature circulation pump draws thermal oil from the storage tank or system and pumps it into the high-temperature heater (e.g., flanged electric heating tubes), where it is heated to the set high temperature (up to 350°C or higher).
    • High-Temperature Heat Output: The high-temperature thermal oil is delivered to the user end (e.g., high-temperature mold, platen, reactor jacket) for efficient heat exchange.
    • Oil Return & Temperature Control: After releasing heat, the thermal oil returns to the unit, passes through an oil filter, and re-enters the heating cycle. A high-temperature PID temperature controller achieves precise temperature control at elevated levels (accuracy up to ±0.5~1°C) by accurately regulating heater activation/deactivation or power output.
    2 Core System Components (Enhanced Design)
    High-Temperature Heating System
    • Heater: Utilizes flanged electric heating tubes that are high-temperature resistant and dry-fire protected, featuring high power density and typically integrated into a pressure-resistant heating cylinder.
    • Heat Transfer Fluid: Thermal oil, selected based on maximum operating temperature, thermal stability, and safety (e.g., models like L-QB, L-QC).
    • High-Temperature Power System: High-temperature, corrosion-resistant coupling pumps or special mechanical seal pumps capable of providing stable, high flow rates under high-temperature, low-viscosity conditions.
    High-Temperature Control System
    • Core: A PID temperature controller designed for high-temperature environments, featuring more complex control algorithms.
    • Key Components: High-power contactors or SCR power controllers, Type K or S thermocouples (for high-temperature measurement), pressure sensors.
    Safety & Auxiliary Systems (Critical)
    • Safety Protections: Multiple over-temperature protections (mechanical thermostat independent of main control), low fluid level protection, pump overload protection, abnormal pressure protection, phase loss/reverse phase protection.
    • Expansion Tank (Overhead Tank): Directly connected to the system, used to compensate for thermal expansion/contraction of the oil, vent vapors, and serve as a safety oil reservoir.
    • Cooling System (Optional but Common): Integrated oil/water heat exchanger or oil/air cooler for rapid cool down after process completion or to assist in temperature control during processes requiring cooling phases.
    • Precision Filter: Removes carbon deposits and impurities from the thermal oil, protecting the pump and heater.
    Industrial Applications
    Industrial Application 1
    Industrial Application 2
    Industrial Application 3
    Flowchart
    Flowchart
    Specification
    Parameter UNIT MODEL
    SOS-05 SOS-10 SOS-20 SOS-30 SOS-40
    Temp control range ℃ Inlet water temperature +45℃-180℃
    Temp control accuracy ℃ PID±1℃
    Power supply / AC380V 50Hz
    Heat transfer medium / Thermo conductive oil
    Cooling method / Indirect Cooling
    Alarm function / Pump reversal / Oil shortage / Overheating / Overload / Oil overflow / Abnormal heating
    Heating power KW 06 09 12 24 36
    Motor power KW 0.33 0.75 1.5 2.2 3
    Pump flow m³/h 6 6 10 14 16
    Pump head m 18 18 20 18 20
    Power Input KW 6.33 9.75 13.5 26.2 39
    Expansion tank capacity L 20 20 20 30 50
    Cooling water pipe Inch 1/2" 1/2" 1/2" 1/2" 1/2"
    Circulating oil pipe Inch 3/4" 1" 1" 1-1/4" 1-1/2"
    Size (L×W×H) mm 850×325×700 850×325×700 850×325×700 1170×450×950 1500×500×1100
    Products Detail
    HG9A2109
    HG9A2110
    HG9A2117
    Frequently Asked Questions (FAQ)
    Q What is the maximum operating temperature of this thermal oil temperature control unit?
    The thermal oil temperature control unit supports a temperature control range from inlet temperature +45°C up to 180°C (standard models). With the appropriate thermal oil selection and system configuration, operating temperatures can reach up to 350°C or higher, making it suitable for high-temperature industrial processes.
    Q What type of heat transfer medium is used, and how do I choose the right one?
    The unit uses thermal (conductive) oil as its heat transfer medium. The correct oil grade should be selected based on your maximum operating temperature, required thermal stability, and safety requirements. Common models include L-QB and L-QC series. Please consult our technical team for a recommendation tailored to your specific application.
    Q What safety protection features are built into the system?
    The unit is equipped with a comprehensive safety protection system including: over-temperature protection (independent mechanical thermostat), low fluid level protection, pump overload protection, abnormal pressure protection, phase loss and reverse phase protection, as well as fault alarm functions covering pump reversal, oil shortage, overheating, overload, oil overflow, and abnormal heating.
    Q Can the unit be integrated with an automation or remote management system?
    Yes. The unit offers optional RS485 communication capability for integration with automatic management systems. Optional PLC control is also available, providing high reliability and strong anti-interference performance. These features enable seamless integration into smart factory or automated production line environments.
    Q How accurate is the temperature control, and what controller technology is used?
    The unit uses a PID (Proportional-Integral-Derivative) temperature control system with an accuracy of ±1°C (standard) and up to ±0.5~1°C with advanced configurations. The PC board self-optimization microprocessor with PID auto-adjustment ensures stable and precise temperature management throughout the process cycle.
    Q Which model is suitable for my application, and what are the available power options?
    Five standard models are available — SOS-05, SOS-10, SOS-20, SOS-30, and SOS-40 — with heating power ranging from 6 KW to 36 KW and pump flow rates from 6 to 16 m³/h. Model selection depends on your required heating capacity, mold or equipment volume, and process temperature. Multi-point temperature control units can also be customized professionally. Please contact us with your application details for a tailored recommendation.